Application and audience
For pottery, polymer clay, air-dry clay and personalizing pieces before drying or firing.
The kit contains 26 uppercase letters, 26 lowercase letters, 10 numbers and 18 symbols. The top character helps identify the stamp; the stamping face is mirrored to create correctly oriented impressions in clay.
Operation and assembly
- Choose your characters and test them on a scrap of the same clay first.
- Hold the stamping face perpendicular to the surface and apply even pressure without rocking.
- Lift the stamp straight away and remove clay from the details before it dries.
Dimensions and variants
- Kit
- 80 characters: 26 uppercase, 26 lowercase, 10 numbers, 18 symbols
- Each stamp
- Approximately 10 × 12 × 20 mm
- Organizer trays
- 8 × 8 (64), 8 × 9 (72) and 8 × 10 (80 stamps)
- Color
- Single-color or optional multicolor printing
Printing information
- PLA is a starting point for general use.
- Use a 0.16 mm layer height or finer, and print one test stamp before the complete set.
- A contrasting top color is optional; AMS is not required for the stamp to work.
Care and use
Work with soft clay before drying or firing. Test consistency, pressure and depth on a scrap of the same clay.
Project questions
Do I need multicolor printing?
No. A contrasting color helps identification, but the stamps work in a single color.
How do I clean them?
Use water, mild soap and a soft brush. Avoid excessive heat and dishwashers for PLA parts.
Sources and documentation
Project documentation · reviewed .
Files and instructions on MakerWorld ↗
